Home arrow Quality arrow Cast Stone Standards
Cast Stone British Standards
The key standard for cast stone is BS 1217:2008 Specification for cast stone.  However, the following table also lists other applicable British Standards, European Standards and Eurocodes relating to the design, manufacture and use of stone products in the UK.
BS      743:1970
Specification for materials for damp proof courses
BS    1217:2008
Specification for cast stone
BS 3892-2:1996
Pulverized-fuel ash. Specification for pulverized-fuel ash to be used as a Type I addition
BS 3892-3:1997
Pulverized-fuel ash. Specification for pulverized-fuel ash for use in cementitious grouts
BS    4027:1996
Specification for sulphate-resisting Portland cement
BS 5628-2:2005
Code of practice for the use of masonry.  Structural use of reinforced and prestressed masonry
BS 5628-3:2005
Code of practice for the use of masonry.  Materials and components, design and workmanship
BS 5642-1:1978
Sills and copings.  Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone
BS 5642-2:1983
Sills anc copings.  Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone
BS 6073-2:2008
Precast concrete masonry units.  Guide for specifying precast concrete masonry units
BS 6093   :2006
Design of joints and jointing in building construction.  Guide
BS 6100-0:2010
Vocabulary.  Introduction and index
BS 6100-1:2004
Vocabulary.  General terms (also numbered as BS ISO 6707-1:2004)
BS 6100-3:2007
Vocabulary.  Civil engineering.  General
BS 6100-6:2008
Building and civil engineering.  Vocabulary.  Construction parts
BS 6100-9:2007
Vocabulary.  Work with concrete and plaster
BS6100-11:2007
Vocabulary.  Performance characteristics, measurement and joints
BS    6213:2000+A1:2010
Selection of constructional sealants.  Guide
BS    6398:1983
Specification for bitumen damp-proof courses for masonry
BS    6515:1984
Specification for polyethylene damp-proof courses for masonry
BS 8000-3:2001
Workmanship on building sites.  Code of practice for dead and imposed loads
BS    8104:1992
Code of practice for assessing exposure of walls to wind-driven rain
BS    8215:1991
Code of practice for design and installation of damp-proof courses in masonry construction
BS 8221-1:2000
Code of practice for cleaning and surface repair of buildings.  Cleaning of natural stones, brick, terracotta and concrete
BS 8221-2:2000
Code of practice for cleaning and surface repair of buildings.  Surface repair of natural stones, brick and terracotta
BS EN   197-1:2000
Cement. Composition, specifications and conformity criteria for common cements
BS EN   197-2:2000
Cement. Conformity evaluation
BS EN   197-4:2004
Cement. Composition, specifications and conformity criteria for low early strength blastfurnace cements
BS EN   450-1:2005 +A1:2007
Fly ash for concrete.  Definition, specifications and conformity criteria
BS EN   771-3:2003
Specificaiton for masonry units.  Aggregate concrete masonry units (dense and light-weight aggregates)
BS EN   771-5:2003
Specification for masonry units.  Manufactured stone masonry units
BS EN   772-2:1998
Methods of test for masonry units.  Determination of percentage area of voids in masonry units (by paper indentation)
BS EN 1774-1:2009
Tests for chemical properties of aggregates.  Chemical analysis
BS EN 1991-1-1:2002
Eurocode 1. Actions on structres.  General actions.  Densities, self-weight, imposed loads for buildings
BS EN 1991-1-7:2006
Eurocode 1.  Actions on structures.  Gneral actions.  Accidental actions
NA to BS EN 1991-1-1:2002
UK National Annex to Eurocode 1.  Actions on structures.  Genenral actions. Densities, self-weight, imposed loads for buildings
NA to BS EN 1991-1-7:2006
UK National Annex to Eurocode 1.  Actions on structures.  General actions.  Accidental actions
BS EN 1992-1-1:2004
Eurocode 2: Design of concrete structures.  General rules and rules for buildings
NA to BS EN 1992-1-1:2004
UK National Annex to Eurocode2.  Design of concrete structures. 
General rules and rules for buildings
BS EN 1996-1-1:2005
Eurocode 6.  Design of masonry structures. General rules for reinforced and unreinforced masonry structures.  
NA to BS EN 1996-1-1:2005
UK National Annex to Eurocode 6.  Design of masonry structures.  General rules for reinforced and unreinforced masonry structures
BS EN 1996-2:2006
Eurocode6.  Design masonry structures.  Design considerations, selection of materials and execution of masonry
NA to BS EN 1996-2:2006
UK National Annex to Eurocode 6.  Design of masonry structures.  Design considerations, selection of materials and execution of masonry
BS EN 1996-3:2006
Eurocode 6. Design of masonry structures.  Simplified calculation methods for unreinforced masonry structures
NA to BS EN 1996-3:2006
UK National Annex to Eurocode 6.  Design of masonry structures.  Simplified calculation methods for unreinforced masonry structure
BS EN 12620:2002 +A1:2008
Aggregates for concrete
BS EN 12878:2005
Pigments for the colouring of building materials based on cement and/or lime. 
Specifications and methods of test
BS EN 13055-1:2002
Lightweight aggregates.  Lightweight aggregates for concrete, mortar and grout
BS EN 15167-1:2006
Ground granulated blast furnacce slag for use in concrete, mortar and grout.  Definitions, specifications and conformity criteria
BS EN 15167-2:2006
Ground granulated blast furnace clag for use in concrete, mortar and grout.  Conformity evaluation
 
Copyright © 2011 Procter Bros Ltd | Designed by sanders