|
BS 743:1970
|
Specification for materials for damp proof courses
|
|
BS 1217:1997
|
Specification for cast stone
|
|
BS 3797:1990
|
Specification for lightweight aggregates for masonry units and structural concrete
|
|
BS 3892
|
Pulverized-fuel ash
Part 1:1997 Specification for pulverized-fuel ash for use with Portland cement
Part 2:1996 Specification for pulverized-fuel ash to be used as a Type I addition
Part 3:1996 Specification for pulverized-fuel ash for use in cementitious grouts
|
|
BS 4027:1996
|
Specification for sulphate-resisting Portland cement
|
|
BS 5642
|
Sills and copings
Part 1:1978 Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone
Part 2:1983 Specification for copings of precast concrete, cast stone, clayware, slate and natural stone
|
|
BS 5628
|
Code of practice for the use of masonry
Part 1:2005 Structural use of unreinforced masonry
Part 2:2005 Structural use of reinforced and prestressed masonry
Part 3:2005 Materials and components, design and workmanship
|
|
BS 6073
|
Precast concrete masonry units
Part 2:1981 Method for specifying precast concrete masonry units
|
|
BS 6093:1993
|
Code of practice for design of joints and jointing in building construction
|
|
BS 6100
|
Glossary of building and civil engineering terms
Part 1.3.1:1992 General and miscellaneous. Walls and cladding
Part 5.1:1992 Masonry. Terms common to masonry
Part 5.2:1992 Masonry. Stone
Part 5.3:1984 Masonry. Bricks and blocks
|
|
BS 6213:2000
|
Selection of constructional sealants. Guide
|
|
BS 6398:1983
|
Specification for bitumen damp-proof courses for masonry f
|
|
BS 6399
|
Loading for Buildings
Part 1:1996 Code of practice for dead and imposed loads
|
|
BS 6457:1984
|
Specification for reconstructed stone masonry units
|
|
BS 6515:1984
|
Specification for polyethylene damp-proof courses for masonry
|
|
BS 6699:1992
|
Specification for ground granulated blastfurnace slag for use with Portland cement
|
|
BS 8000
|
Workmanship on building sites
Part 3:2001 Code of practice for masonry
|
|
BS 8110
|
Structural use of concrete
Part 1:1997 Code of practice for design and construction
Part 2:1985 Code of practice for special circumstances
|
|
BS 8215:1991
|
Code of practice for design and installation of damp-proof courses in masonry construction
|
|
BS 8221
|
Code of practice for cleaning and surface repair of buildings
Part 1:2000 Cleaning of natural stones, brick, terracotta and concrete
Part 2:2000 Surface repair of natural stones, brick and terracotta
|
|
BS EN 197
|
Cement
Part 1:2000 Composition, specifications and conformity criteria for common cements
Part 2:2000 Conformity evaluation
Part 4:2004 Composition, specifications and conformity criteria for low early strength blastfurnace cements
|
|
BS EN 771
|
Specification for masonry units
Part 3:2003 Aggregate concrete masonry units (dense and light-weight aggregates)
|
|
BS EN 772
|
Methods of test for masonry units
Part 2:1998 Determination of percentage area of voids in masonry units (by paper indentation)
|
|
BS EN 1744
|
Tests for chemical properties of aggregates
Part 1:1998 Chemical analysis
|
|
BS EN 12620:2002
|
Aggregates for concrete
|
|
BS EN 12878:2005
|
Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
|
|
BS EN 13055
|
Lightweight aggregates
Part 1:2002 Lightweight aggregates for concrete, mortar and grout
|
